It’s common knowledge that most modern laptops, desktops, and smartphones are equipped with a WiFi connection. But did you know that it’s actually possible to boost the signal and get internet access from far, much farther away? The short answer is – yes! However, this won’t work for everyone. You need to have a specific device and some specific circumstances to make it happen.
When you’re trying to boost the wifi signal, you’re trying to increase the number of people who can access your network at once. You don’t want to saturate an entire area with signals. Instead, you want to create a “hot spot” where a group of users will be able to get access to your wireless network at the same time. As an example, if your condo board has four simultaneous users, you want to configure your condo access point (also known as Wi-Fi hot spot) to provide 4 connections. This will improve the speed of all four users.
In order to do this, you need to make sure your AP can handle up to 5 connection requests per second. Of course, your AP already has an idea of how many clients it can support. So, first, determine how many clients you’ll be getting online at any given time. Then set your ap configuration or access point to match the number of users. If you want to boost your wifi signal and make things happen faster, make sure your settings are tweaked to the maximum.
Contents
How to boost wifi signal
The reason why many people have problems with the internet or wireless is that they either don’t have a good signal or their AP uses poor quality channels. As we mentioned before, our wonderful ap firmware makes things much better by improving your signal strength and channel frequency selection. If you’re not familiar with the difference, think of your radio’s antenna and reception. You have to pick the right one in order to receive and transmit. That’s the same principle with a wifi access point.
If your router is brand new, don’t expect to see much of a difference in your wireless router’s performance. That’s because most routers on the market today use the standard channels. If you’re upgrading your hardware, you need to check your router’s documentation to find out which channels it supports. With our amazing boost wifi signal boosters, you can easily increase your bandwidth without spending a fortune on new hardware.
That brings me up to my last point: If you use a mobile smartphone, tablet, or other devices that access points as part of its OS, don’t assume they all support the same frequency band. While the standard 3G and GSM bands are popular, there are still millions of people out there who use only two or three carriers. That’s why you always need to double-check if your access points are working. That’s where our amazing Tanaza wireless routers come in. Once you find one with built-in DSC adapters, you’ll never have to worry about another compatibility issue again.
Want to boost your wifi signal? Our products provide an easy solution for everyone. From the beginning user who just wants a simple way to boost their signal strength to the advanced user who wants to run their entire network off of one booster, Tanaza gives you everything you need to keep your networks always up and download videos while you sleep.